Engineered by explorers for explorers


© 2025 BootKamp

Explore more.
Engineered to be the lightest, removable vehicle storage system available. Built with aerospace materials. Made to go anywhere.

Lightweight. Modular. Tough. Installs in minutes - no drilling, no workshop, no compromises. Slide it in, lock it down and go.

Single open platform system with IGT kitchen option.

Dual drawer system with IGT kitchen option.

"Most vehicle systems are built for the explorer you're supposed to be. BootKamp is built for the one you actually are - doing the school run on Tuesday while dreaming of setting up camp on Friday night." V Townsend, Founder

IGT kitchen ready. Integrated cooking system equipped. Just drop in your compatible IGT & universal modular inserts.

Removes in minutes. GVM friendly at 25kg all up for our lightest version - converting your daily driver into a weekend tourer or outback explorer.

Made to fit your vehicle. Our single open platform system features a 180cm extension - with optional IGT kitchen module.

Configure yours from $2,250

Configure yours from $2,250. For 250 Prado (& 120 & 150 series), 200 & 300 Series Land Cruiser, Ineos Grenadier, Defender, Pajero, X Trail and many others.

Lightweight

>

The BaseKamp platform weighs just 18 kg. That's 50 - 60% lighter than traditional systems. It can support over 300 kg of load, but is light enough to be removed by one person.

18kg for base platform

6061T5 Aerospace aluminium

Supports up to 300kg

50-60% lighter

1-person removal

GVM friendly

Modular

>

Start with our BaseKamp and go from there. BootKamp integrates air, power, water, heat & lockable storage into one modular system.

Add or subtract modules

IGT kitchen compatable

Field servicable

Grows with you

Moves across vehicles

IGT Kitchen

>

BootKamp supports the IGT (Integrated Grill Table) kitchen system (embraced by an ecosystem of brands), into a vehicle-first, expedition-grade system.

Universal system

Sinks

Gas cookers

BBQs

Removable storage

Globally available

Adaptable

>

Modules lift and shift from vehicle to campsite to garage. Swap out your favourite IGT units from vehicle to campsite. Remove it all for the school run when you get home.

Interchangeable modules

Vehicle to camp

Widely available

Universal fittings

No modifications

Lightweight

The BaseKamp platform weighs just 18 kg. That's 50 - 60% lighter than traditional systems. It can support over 300 kg of load, but is light enough to be removed by one person.

18kg for base platform

6061T5 Aerospace aluminium

Supports up to 300kg

50-60% lighter

1-person removal

GVM friendly

Modular

Start with our BaseKamp and go from there. BootKamp integrates air, power, water, heat & lockable storage into one modular system.

Add or subtract modules

IGT kitchen compatable

Field servicable

Grows with you

Moves across vehicles

IGT Kitchen

BootKamp supports the IGT (Integrated Grill Table) kitchen system (embraced by an ecosystem of brands), into a vehicle-first, expedition-grade system.

Universal system

Sinks

Gas cookers

BBQs

Removable storage

Globally available

Adaptable

Modules lift and shift from vehicle to campsite to garage. Swap out your favourite IGT units from vehicle to campsite. Remove it all for the school run when you get home.

Interchangeable modules

Vehicle to camp

Widely available

Universal fittings

No modifications

Will it fit my vehicle? How expensive is it?How do I install it? Is it future-proof? Your questions answered.

1. What is BootKamp?
icon

BootKamp is a modular, aerospace-grade vehicle storage and kitchen system engineered for explorers, adventurers, and everyday drivers. It’s built from lightweight aluminum alloys — not plywood or steel — making it up to 60% lighter than traditional drawer systems. Designed to install and remove in minutes, BootKamp transforms your vehicle into a precision survival platform that’s ready for any journey.

2. How much does the BootKamp system weigh?
icon

The core BootKamp modular exoskeleton weighs just 18 kg — about the same as a medium-sized dog or a checked luggage bag. Full drawer system including kitchen units weigh 38kg - around 50% less than traditional drawer systems.

3. Is BootKamp compatible with my vehicle?
icon

Yes. BootKamp is designed to be vehicle-agnostic and future-proof. Our modular mounting system adapts to a wide range of adventure vehicles — from Toyota Prado, Ineos Grenadier, LandCruiser, FJ Cruiser and Jimny, to vans and utes. Once you change vehicles, the same BootKamp frame can transfer across with minimal adjustments.

4. How easy is it to install or remove?
icon

Very. BootKamp installs in under 10 minutes with no drilling, cutting, or permanent modifications. It locks securely into existing vehicle points using precision quick-mount hardware. Removal takes even less time — so your vehicle can go from daily driver to expedition rig in minutes.

5. What makes BootKamp different from traditional drawer systems?
icon

Traditional drawer systems are heavy, fixed, and made from materials that degrade over time. BootKamp is built from aerospace-grade aluminum, designed for zero-rattle durability, corrosion resistance, and modular reconfiguration. It’s lighter, stronger, smarter — and can be removed, repaired, or reconfigured without a workshop.

6. Can BootKamp integrate power, water, and cooking systems?
icon

Absolutely. BootKamp’s modular panels are designed for plug-and-play integration of power systems, water tanks, induction cooktops, and slide-out kitchen modules. Each component connects through a common exoskeleton interface — so you can expand your setup as your adventures evolve.

7. Where is BootKamp made?
icon

Proudly built, tested & engineered in Australia.

1. What is BootKamp?
icon

BootKamp is a modular, aerospace-grade vehicle storage and kitchen system engineered for explorers, adventurers, and everyday drivers. It’s built from lightweight aluminum alloys — not plywood or steel — making it up to 60% lighter than traditional drawer systems. Designed to install and remove in minutes, BootKamp transforms your vehicle into a precision survival platform that’s ready for any journey.

2. How much does the BootKamp system weigh?
icon

The core BootKamp modular exoskeleton weighs just 18 kg — about the same as a medium-sized dog or a checked luggage bag. Full drawer system including kitchen units weigh 38kg - around 50% less than traditional drawer systems.

3. Is BootKamp compatible with my vehicle?
icon

Yes. BootKamp is designed to be vehicle-agnostic and future-proof. Our modular mounting system adapts to a wide range of adventure vehicles — from Toyota Prado, Ineos Grenadier, LandCruiser, FJ Cruiser and Jimny, to vans and utes. Once you change vehicles, the same BootKamp frame can transfer across with minimal adjustments.

4. How easy is it to install or remove?
icon

Very. BootKamp installs in under 10 minutes with no drilling, cutting, or permanent modifications. It locks securely into existing vehicle points using precision quick-mount hardware. Removal takes even less time — so your vehicle can go from daily driver to expedition rig in minutes.

5. What makes BootKamp different from traditional drawer systems?
icon

Traditional drawer systems are heavy, fixed, and made from materials that degrade over time. BootKamp is built from aerospace-grade aluminum, designed for zero-rattle durability, corrosion resistance, and modular reconfiguration. It’s lighter, stronger, smarter — and can be removed, repaired, or reconfigured without a workshop.

6. Can BootKamp integrate power, water, and cooking systems?
icon

Absolutely. BootKamp’s modular panels are designed for plug-and-play integration of power systems, water tanks, induction cooktops, and slide-out kitchen modules. Each component connects through a common exoskeleton interface — so you can expand your setup as your adventures evolve.

7. Where is BootKamp made?
icon

BootKamp is proudly designed, engineered, and assembled in Australia, field-tested across 30,000+ Outback kilometres. Every latch, hinge, and panel is built to survive the harshest terrain on Earth — and look good doing it.

Tested in the Outback.
Proudly made right here in Australia.

Tested in the Outback.
Proudly made right here in Australia.


Explore more.
Engineered to be the lightest, removable vehicle storage system available. Built with aerospace materials. Made to go anywhere.

Lightweight. Modular. Tough. Installs in minutes.

Dual drawer system with IGT kitchen option.

"Most vehicle systems are built for the explorer you're supposed to be. BootKamp is built for the one you actually are - doing the school run on Tuesday while dreaming of setting up camp on Friday night." V Townsend, Founder

IGT kitchen ready. Integrated cooking system equipped. Just drop in your compatible IGT & universal modular inserts.

Removes in minutes. GVM friendly at 25kg all up for our lightest version - converting your daily driver into a weekend tourer or outback explorer.

Made to fit your vehicle. Our single open platform system features a 180cm extension - with optional IGT kitchen module.

Choose your system from $2,250.
Built to fit the Prado 250 & most 4x4s. (Currently the only removable 7-seat Prado 250 storage option available.)

1. What is BootKamp?
icon

BootKamp is a modular, aerospace-grade vehicle storage and kitchen system engineered for explorers, adventurers, and everyday drivers. It’s built from lightweight aluminum alloys — not plywood or steel — making it up to 60% lighter than traditional drawer systems. Designed to install and remove in minutes, BootKamp transforms your vehicle into a precision survival platform that’s ready for any journey.

2. How much does the BootKamp system weigh?
icon

The core BootKamp modular exoskeleton weighs just 18 kg — about the same as a medium-sized dog or a checked luggage bag. Full drawer system including kitchen units weigh 38kg - around 50% less than traditional drawer systems.

3. Is BootKamp compatible with my vehicle?
icon

Yes. BootKamp is designed to be vehicle-agnostic and future-proof. Our modular mounting system adapts to a wide range of adventure vehicles — from Toyota Prado, Ineos Grenadier, LandCruiser, FJ Cruiser and Jimny, to vans and utes. Once you change vehicles, the same BootKamp frame can transfer across with minimal adjustments.

4. How easy is it to install or remove?
icon

Very. BootKamp installs in under 10 minutes with no drilling, cutting, or permanent modifications. It locks securely into existing vehicle points using precision quick-mount hardware. Removal takes even less time — so your vehicle can go from daily driver to expedition rig in minutes.

5. What makes BootKamp different from traditional drawer systems?
icon

Traditional drawer systems are heavy, fixed, and made from materials that degrade over time. BootKamp is built from aerospace-grade aluminum, designed for zero-rattle durability, corrosion resistance, and modular reconfiguration. It’s lighter, stronger, smarter — and can be removed, repaired, or reconfigured without a workshop.

6. Can BootKamp integrate power, water, and cooking systems?
icon

Absolutely. BootKamp’s modular panels are designed for plug-and-play integration of power systems, water tanks, induction cooktops, and slide-out kitchen modules. Each component connects through a common exoskeleton interface — so you can expand your setup as your adventures evolve.

7. Where is BootKamp made?
icon

Proudly built, tested & engineered in Australia.

1. What is BootKamp?
icon

BootKamp is a modular, aerospace-grade vehicle storage and kitchen system engineered for explorers, adventurers, and everyday drivers. It’s built from lightweight aluminum alloys — not plywood or steel — making it up to 60% lighter than traditional drawer systems. Designed to install and remove in minutes, BootKamp transforms your vehicle into a precision survival platform that’s ready for any journey.

2. How much does the BootKamp system weigh?
icon

The core BootKamp modular exoskeleton weighs just 18 kg — about the same as a medium-sized dog or a checked luggage bag. Full drawer system including kitchen units weigh 38kg - around 50% less than traditional drawer systems.

3. Is BootKamp compatible with my vehicle?
icon

Yes. BootKamp is designed to be vehicle-agnostic and future-proof. Our modular mounting system adapts to a wide range of adventure vehicles — from Toyota Prado, Ineos Grenadier, LandCruiser, FJ Cruiser and Jimny, to vans and utes. Once you change vehicles, the same BootKamp frame can transfer across with minimal adjustments.

4. How easy is it to install or remove?
icon

Very. BootKamp installs in under 10 minutes with no drilling, cutting, or permanent modifications. It locks securely into existing vehicle points using precision quick-mount hardware. Removal takes even less time — so your vehicle can go from daily driver to expedition rig in minutes.

5. What makes BootKamp different from traditional drawer systems?
icon

Traditional drawer systems are heavy, fixed, and made from materials that degrade over time. BootKamp is built from aerospace-grade aluminum, designed for zero-rattle durability, corrosion resistance, and modular reconfiguration. It’s lighter, stronger, smarter — and can be removed, repaired, or reconfigured without a workshop.

6. Can BootKamp integrate power, water, and cooking systems?
icon

Absolutely. BootKamp’s modular panels are designed for plug-and-play integration of power systems, water tanks, induction cooktops, and slide-out kitchen modules. Each component connects through a common exoskeleton interface — so you can expand your setup as your adventures evolve.

7. Where is BootKamp made?
icon

Proudly built, tested & engineered in Australia.

Tested in the Outback. Made in Australia